burkert 0223手动控制适合低压的电磁阀0223型

型号为原装burkert 0223手动控制适合低压的电磁阀0223型的直动式直通阀，可在无流量时关闭或打开。磁力驱动装置通过一个带有中间通风腔室的 ptfe 双层密封件与介质隔开。burkert 0223手动控制适合低压的电磁阀0223型这种阀门可在介质压力较低的情况下进行闭塞、计量、灌注和通风等操作；也适合技术真空状态。

burkert 0223手动控制适合低压的电磁阀0223型特点：

1. 介质分离
2. 便于维修, 手动控制
3. 可选择带有电气位置反馈装置

burkert 0223手动控制适合低压的电磁阀0223型技术参数：

body material brass
seal materials nbr, fkm
burkert 0223medium
 with nbr
 with fkm
neutral liquids e.g. compressed air, water, hydraulic oil,
oils and fats without additives, technical vacuum
hot air, per-solution, hot oil,
oils with additives, technical vacuum
burkert 0223medium temperature
 with nbr
 with fkm
-10 up to +90 ºc
-10 up to +130 ºc
ambient temperature max. +50 ºc
viscosity 100 to 21 mm2/s
burkert 0223operating voltages
 on request
24/230 v 50 hz
24/230 v uc
230 v uc
other voltages
voltage tolerance ±10%
cycling rate max. 6/min with uc
duty cycle ed
electrical connection cable plug (supplied as standard)
protection class ip65 with cable plug
coil insulation class h
installation as required, preferably with actuator upright
type 2508
cable plug
type 1078
burkert 0223timer unit
type 0223 can be combined with...
• direct acting
• with hermetic isolation of fluid
• with manual override
• nc and no circuit function
• optional with electrical position feedback
response times [ms]:
 opening
 closing
measured at valve outlet at 6 bar and +20ºc.
pressure relief 0 90%
pressure relief 100 to 10%

我们专业销售burkert流体控制系统产品，以上为burkert 0223手动控制适合低压的电磁阀0223型部分内容，如需帮助请联系上海囯与自动化设备有限公司以上

本产品的品牌是burkert，型号是0223，材质是不锈钢或黄铜，类型(通道位置)是二通式，连接形式是螺纹，流动方向是单向，用途是调节